Hi Everyone, so what kind of epoxy would hold that metal piece to key cover/fall board so that I can screw it into the piano without the bracket pin popping out of the hole in the side edge of the key cover? Thanks. I have to go back tomorrow to get that thin on. I worked with it forever yesterday. As soon as I put the pin in the hole and line it up and screw it into the piano, when I approach the other side the pin I just put in pops out and the only thing attached are the screws holding the bracket to the piano. So any ideas would be great. Thanks Marshall Marshall Gisondi Piano Technician Marshall's Piano Service pianotune05 at hotmail.com 215-510-9400 www.phillytuner.com Graduate of The School of Piano Technology for the Blind www.pianotuningschool.org Vancouver, WA -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100902/0e7b21d2/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC