Good information, Roger! By the way, I hope those Diamond pins are going in our Steinway A...! On Wed, Sep 22, 2010 at 4:29 PM, Noah Frere <noahfrere at gmail.com> wrote: > Excellent points. > > > On Tue, Sep 21, 2010 at 6:38 PM, Roger Gable <roger at gablepiano.com> wrote: > >> Noah, >> I would advise you to consider the Diamond pins for the following reasons: >> The Denro pins can vary in diameter by as much as .004". That's enough to >> produce an irritating difference in pin torque. Also, ( this is a big one) >> the Denro pins aren't always round, which contributes to jumpy pins. >> Roger Gable >> P.S. I just bought a set of Diamond Pins. The current price is $164.00 >> >> ----- Original Message ----- >> *From:* Noah Frere <noahfrere at gmail.com> >> *To:* pianotech at ptg.org >> *Sent:* Tuesday, September 21, 2010 12:25 PM >> *Subject:* [pianotech] tuning pins >> >> I can understand different prices for different qualities, but $52.95 >> Denro vs. $142 Diamond seems like a lot. Any reason I shouldn't order Denro? >> >> > -- Ryan Sowers, RPT Puget Sound Chapter Olympia, WA www.pianova.net -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100922/4f736eed/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC