I've also tried this one but with just whatever paper I had handy. It works great! The fiber in the paper adds a lot to the strength of this repair. The super glue basically makes an acrylic/fiber composite. On Mon, Sep 27, 2010 at 10:10 AM, <KnottStudios at aol.com> wrote: > Take a small piece of paper towel, roll it tightly and insert it into > stripped screw hole and slightly wet it with CA glue. Let partially dry and > then insert screw, It will be tighter than other holes. Don't over use CA > and don't wait until it is completely dry. Don't use shank until repair is > made > Carl Knott > Knott Piano Service > -- Ryan Sowers, RPT Puget Sound Chapter Olympia, WA www.pianova.net -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100927/acea2d12/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC