Joe, you are correct in the "creep". I should have been more specific in the application. I use a hypo needle and hit a single drop to the bass of the screw and apply again. Not much and it shouldn't get any further than the screw and barrel. As with anything else, it's all about how you use it. Two aspirin will help your headache, a bottle will probably kill you :-) Al - High Point, NC On Dec 17, 2011, at 2:33 PM, Joseph Garrett wrote: > Al said: "Several applications of Liquid Wrench at the screw bass, then us > a smooth jaw plier to loosen screws" > > Al, > I would strongly urge all to not use Liquid Wrench! The darn stuff is > designed to "creep"! It will gum up any flanges that it comes in contact > with. I recently did some experimenting with the stuff. My conclusion is: > Don't use it! Same goes for WD-40 and the like. Oil makes wood spongy. Not > what you want to achieve imo. > Just my take on it. > Joe > > > Joe Garrett, R.P.T. > Captain of the Tool Police > Squares R I > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20111218/965594b9/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC