Turn the action upside down so the stickers want to stay in the hole, then you can lift the out of place ones into place and they'll stay there. Dean Dean W May (812) 235-5272 PianoRebuilders.com (888) DEAN-MAY Terre Haute IN 47802 _____ From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of J Patrick Draine Sent: Tuesday, February 01, 2011 11:54 AM To: Pianotech List Subject: [pianotech] Acrosonic sticker rail After carefully removing a Baldwin Acrosonic spinet action, paying moderate attention to securing the stickers to their rail, and bringing the action back home, I (once again) allowed a number of the stickers to "pop out" while situated on a workbench. Dumb of me to use the "jam some mutes on the abstract pins" beyond short term necessity. So, what I am asking y'all, is what is the most efficient way to get them back in place (preferably while still in my shop space rather than at the piano)? I'm sure it's pretty simple, but I generally spend too much time juggling 88 thingies around. What's the verdict? Patrick DraineDSCN0537.jpeg -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20110201/07d369f8/attachment-0001.htm> -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 39152 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech.php/attachments/20110201/07d369f8/attachment-0001.jpeg>
This PTG archive page provided courtesy of Moy Piano Service, LLC