Terry Bottom board, kick panel, knee board, they all sort of blend together. LOL Wim -----Original Message----- From: Terry Farrell <mfarrel2 at tampabay.rr.com> To: pianotech <pianotech at ptg.org> Sent: Fri, Feb 18, 2011 3:20 am Subject: Re: [pianotech] Bottom Board Material A guy who glues up soundboard panels on a regular basis - does he have dge glueing equipment? Edge gluing - like this? ith equipment - like this? o make things - like these? Sorry Wim. And here I thought me and my work might be famous! Fame can e fleeting I suppose. Not to worry, I forget who is who and who does hat sort of specialty all the time. And like someone else said, bottom board, not knee board. I thought hose terms were pretty universal and concrete - unlike amplify and ransduce...... ;-) Terry Farrell On Feb 17, 2011, at 8:44 PM, Wim Blees wrote: > Terry If you have the maple, and the equipment to do edge glueing, I would suggest that. You will, however, have to cover the finished panel with veneer, the same wood as the rest of the piano. Wim -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20110218/08ce88f9/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC