David, It certainly wouldn't hurt to take speaking length measurements and enter them into a scaling program. I personally would never restring a piano without doing so, if for no other reason than curiosity, but the numbers you show raise some question marks. Tom Cole On 3/8/11 7:02 AM, David Renaud wrote: > The strings I just took off a G7 I believe are the wrong scale. > The scale is not on the bridge and not in the book "A guide to restringing" > > Anyone have the original G7 Scale they may wish to share? > > What was on there does not use many half sizes, and even goes backwards to > a thinner diameter for some unisions in the low tenor. > > This is what was on the piano > > 13.5 - 8 > 14.5 - 6 > 15.5- 9 > ---------- > 15.5 -6 > 16-4 > 17 - 11 > ---------- > 17 - 4 > 17.5- 8 > 18 -4 > 17.5 -2 > 19.5 -4 > > Cheers > Dave Renaud > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC