I didn't realize that the brass was toast. You're sort of stuck then. For $600 you can learn a lot about soldering. David Love www.davidlovepianos.com -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Ron Nossaman Sent: Friday, March 25, 2011 9:24 PM To: pianotech at ptg.org Subject: Re: [pianotech] Riding the rails On 3/25/2011 10:51 PM, Ed Foote wrote: > David asks: >> >BTW are you sure you can't salvage them with some wood rot doctor type > stuff. > > The brass is split all to hell. I have had John Dewey do some before, as > well as Chris Robinson. However, at over $600 for installing two rails > that cost about $70 each, plus the delay in shipping and waiting, I > gotta find a better way. I can handle most of the foreseeable problems, > but have never soldered anything that heavy. Considering the profit potential, I can't imagine why not. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC