Wim, What choices have you figured out so far? -John Parham > -------- Original Message -------- > Subject: [pianotech] Fwd: > From: tnrwim at aol.com > Date: Thu, September 29, 2011 9:25 pm > To: pianotech at ptg.org > > > I'm taking the strings off a Steinway upright. One of the screws on the pressure bar is frozen. Before I realized this, I used a smaller screw driver, and because the screw is made of a soft metal, the edges ripped off. I now have a larger screwdriver tip that fits the slot, but because the slot of the screw is worn off, (see picture), the blade keeps slipping of the edge. > > What do I do, short of drilling out the screw, which would mean buying a new one? > > Wim
This PTG archive page provided courtesy of Moy Piano Service, LLC