What's your method for applying the Teflon, Bill? Barbara Richmond, RPT near Peoria, Illinois ----- Original Message ----- From: "William Monroe" <bill at a440piano.net> To: pianotech at ptg.org Sent: Saturday, September 3, 2011 9:29:49 AM Subject: Re: [pianotech] Damper wire bushing lubrication? Hi David, Teflon powder is my choice, hands down. William R. Monroe On Sat, Sep 3, 2011 at 6:27 AM, David Boyce < David at piano.plus.com > wrote: When re-fitting grand dampers after renewing the damper felts and polishing the wires/stems, what do you favor for lubricating the existing bushings? Teflon powder, Protek CLP, or nothing? Best regards, David. -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20110903/8f5160ba/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC