On 2/12/2012 11:50 PM, Joseph Garrett wrote: > Why bother? The whole idea is to get rid of the tuning pins and the > wire, is it not. Who cares if the wire is locked into/onto the tuning > pins? The whole mess will wind up in the circular file anyway. Right? > Joe > > ----- Original Message ----- > *From:* John Ross <mailto:jrpiano at eastlink.ca> > *To: *joegarrett at earthlink.net > <mailto:joegarrett at earthlink.net>;pianotech at ptg.org > <mailto:pianotech at ptg.org> > *Sent:* 2/12/2012 9:47:46 PM > *Subject:* Re: [pianotech] open letter to CA users..??? > > I would try a becket breaker. > John Ross > Windsor, Nova Scotia Uh, fellas, didn't he say he was repinning, not restringing? And Rob, why didn't the CA work where an oversize pin will? Is the block intact enough for that? Will a better application of CA to what's there do it and bypass the problem of getting the coils off altogether? Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC