[pianotech] square rubber grommets

Norman Cantrell normancantrell at sbcglobal.net
Mon Feb 27 10:29:24 MST 2012


Terry
If you are down to the square metal nuts inside the original grommets you can use a long tuning tip such as are sold for tuning the top section in a grand piano.  Tuning pins are square and so are those nuts.  The 1/2 to 5/8 diameter on the tuning tip gives your fingers something to grip while removing them.  Since this is a metal to metal interface you could place a small drop of  lubricant to break the threads before unscrewing them.  The tool that John described from the supply house will help in installing the new ones.
Norman Cantrell, RPT

--- On Mon, 2/27/12, pianolover 88 <pianolover88 at hotmail.com> wrote:

From: pianolover 88 <pianolover88 at hotmail.com>
Subject: [pianotech] square rubber grommets
To: pianotech at ptg.org
Date: Monday, February 27, 2012, 10:37 AM





Client with an old Whitney Kimball spinet with those square rubber grommets that pop into the forked end of the keys. As soon as I played the piano I noticed that the keys made a clicking sound, and knew that it was caused from the grommets having become hard and "fused" to the forks. I happened to have a couple new ones with me, and explained what needed to be done. As I proceeded to pop one off, it shattered to pieces. I replaced it with a new one and the clicking was gone. So I'll be replacing the whole set. Luckily, the elbows are wood and not that old, yellowing and brittle plastic! 

So my question is, what would be the fastest most efficient way to remove and install the new grommets? I'm thinking a socket that fits that little square nut, which by the way, the old ones remain on the sticker wire after the old hard rubber breaks apart, and is almost rusted in place, making it hard to get off! So, once all the old grommets and nuts are removed, and the wires cleaned and lubed, would it easiest just to twist all the new ones on my hand, or use a screwdriver socket?

Cheers,

Terry "UniGeezer" Peterson
"Over 50, and not '2' Tired!" 
www.unigeezer.com
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120227/cf3c61c2/attachment.htm>


More information about the pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC