Ron This one looked like it was flat all the way. The piano did not look rebuilt, although the finish was very nice. I didn't copy the serial number, so I don't know how old it is. Wim -----Original Message----- From: Ron Nossaman <rnossaman at cox.net> To: pianotech <pianotech at ptg.org> Sent: Mon, Mar 5, 2012 9:24 am Subject: Re: [pianotech] flat v-bar On 3/5/2012 1:08 PM, tnrwim at aol.com wrote: At this point I am not planning to replace the v-bar. Then you may get another callback. The one I found didn't collapse all he way and didn't look trustworthy, so I hammered it flat so it ouldn't collapse further. Joe, I have never heard of a model C Baldwin grand either. It's about the same size and scaling as a Baldwin L. Del, or anyone, have you heard of a C? Was it a limited production model? The one I found was labeled a model K. It had been sort of rebuilt omewhere along the line, so I don't know if that was real or not. on N -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120305/d68fb2f2/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC