I have an old upright with perennial tight action centers. Protek provides only temporary relief so I want to try using H2O with alcohol. Can I apply the alcohol to the hammer flanges without removing them from the rail? My concern is that the water/alcohol mixture will run over into onto the hammer butt or spring punching and loosen the glue. Thanks, David Weiss From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Tom Driscoll Sent: Friday, November 25, 2011 10:13 AM To: pianotech at ptg.org Subject: Re: [pianotech] piano behavior - shrinking with H20 & alcohol Rick, I use denatured alc mixed 50 -50 with water. Tom D. Subject: Re: [pianotech] piano behavior - shrinking with H20 & alcohol What is the ratio of water to alcohol ? Rick Ucci Uccipiano.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120310/a9467ed8/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC