Hi Alan I agree...Its a beautiful too,l and I own one, however the tape is 1/20th the cost Dale Erwin RPT- Mason & Hamlin/Steinway/U.S pianos Pre-hung Ronsen hammer sets/Abel parts Sitka Soundboards & Supplies WWW.Erwinspiano.com 209-577-8397 -----Original Message----- From: Alan Eder <reggaepass at aol.com> To: musicbased <musicbased at yahoo.co.uk>; pianotech <pianotech at ptg.org> Sent: Wed, Mar 21, 2012 10:34 am Subject: Re: [pianotech] string height gauge Keith Bowman makes a nice string height gauge that is sold through Renner USA. Yes, the only non-metric measurements I take these days are things most readily measured in thousandths of an inch, such as center pins and piano wire. Alan Eder -----Original Message----- From: lewis Newman <musicbased at yahoo.co.uk> To: pianotech <pianotech at ptg.org> Sent: Wed, Mar 21, 2012 10:17 am Subject: [pianotech] string height gauge Hello, Would anyone be able to recommend a good tool for measuring the string heights in mm?-Is there any digital ones nowadays?... My gauge is the only thing i use that is not metric, and i find it very confusing! Thanks in advance, Lewis. -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120321/02b90b7e/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC