That wasn't a concept drawing-that was what we built. ddf Delwin D Fandrich Piano Design & Fabrication 6939 Foothill Court SW, Olympia, Washington 98512 USA Phone 360.515.0119 - Cell 360.388.6525 <mailto:del at fandrichpiano.com> del at fandrichpiano.com - <mailto:ddfandrich at gmail.com> ddfandrich at gmail.com From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Gene Nelson Sent: Sunday, May 20, 2012 10:19 AM To: pianotech at ptg.org Subject: Re: [pianotech] S&S K(52) Restoration _____ Yeah, I think that is pretty much correct. Ultimately, it was because Del told to me do it that way! But it sure did make sense. Up the the treble area, we really chiseled out as much of the rim as we dared - to make the soundboard between the bridge and the rim (under the speaking area of the strings) as wide as possible. Terry *** Goes to show: Comparing Del's concept drawing of the Z-Bar assembly and your board it appears the intention is to center the bridge on the ribs. Gene -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120520/81a9193a/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC