I can't say for certain either way. I don't think I could give you a knowing definitive answer to that. My sense would be that those things were addressed as needed. Will Truitt From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Gene Nelson Sent: Monday, May 28, 2012 11:57 AM To: pianotech at ptg.org Subject: Re: [pianotech] re-fabricating a failed soundboard . They showed us 3 boards that they had steamed out and reribbed. The board is steamed out from above, steam penetrating the soundboard from above and making its way through the wood to the glue at the rim, case veneer protected from the steam. ***Are you certain that none of the panel glue joints were not compromised or weakened? Seems to me they would be vulnerable. Gene -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120528/b9fc73bc/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC