[pianotech] Baldwin D String Rendering

[Ron Nossaman]

On 11/30/2012 1:42 PM, Encore Pianos wrote:

>
> It certainly seems like a precursor to the SD-10, sharing the vertical
> hitch pins and front treble termination bars (the difference being that
> your D has a the termination bars as a single piece filling the whole
> treble section, the SD-10 has the individual bars that can be adjusted
> forward or back).

There's no adjustment. The SD-10 termination pieces mount where the 
holes are drilled and tapped in the plate.


>But the function is essentially the same between the two.

It is - noisy usually. I tune a couple of the old system like Terry's 
photo, and they don't render well either. I'd love to rebuild one of 
these, as I have a couple of mildly questionable ideas for improvements.

Ron N