Jim, I've seen it attempted once by a finisher and the piano came out greyish looking. I don't know what the method was but the result was less than acceptable. Tom D. ----- Original Message ----- From: "Jim Ialeggio" <jim at grandpianosolutions.com> To: <pianotech at ptg.org> Sent: Friday, August 31, 2012 6:07 PM Subject: [pianotech] bringing polyester gloss down to satin > Those out there with polyester finishing experience...I don't use the > stuff, but a client wants to knock down the garish polyester black gloss > to a satin...( I agree with him). Is there any reason why standard rubbing > techniques like ultra fine scotchbrites/steel wool/or pumice wouldn't > work? > > Jim Ialeggio > > -- > Jim Ialeggio jim at grandpianosolutions.com > 978 425-9026 > Shirley Center, MA >
This PTG archive page provided courtesy of Moy Piano Service, LLC