[pianotech] Damper tray block

[Ron Nossaman]

On 9/28/2012 8:37 PM, Ed Foote wrote:

>   Hardest part is getting the hole right for the mounting screw. I would
> place a punching, with just a spot of glue on one side directly over the
> hole in the piano, and with more glue on the front, press the block on
> to it so that the punching transfers to the back of the block. Drill there.

I believe I'd plug the hole and sidestep Murphy, to whatever degree 
that's possible. Though that might be the second try...
Ron N