To recap the story, someone had their Weinbach moved and the movers lost the hinge pins. The pins measured .210", quite large. I borrowed the pins from a Howard grand (Samick) that I have in my shop. However Samick no longer carries these and I haven't heard back from Petrof (Weinback). So, I made two pins out of 3/16" rod and 7/32" tubing. photo att. Jane was most helpful with this and other parts I wanted but there still was a long delay due to a constant change in personnel in the parts dept. Regards, Jon Page -------------- next part -------------- A non-text attachment was scrubbed... Name: Large diameter hinge pins.jpg Type: image/jpeg Size: 48425 bytes Desc: not available URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20130216/e0a4164a/attachment-0001.jpg>
This PTG archive page provided courtesy of Moy Piano Service, LLC