So, here's how I see it working: The wood block is placed in a vise and the wire pulled up through the the steel hole and twisted it into a loop with your plier tool. The end of the loop is left long, and goes under the screw. It is then twisted by rotating the pliers parallel to the top of the block. Is that close? Phil Jamison Subject: [pianotech] German Loop Tools As promised, here's three pics of the tools needed to make consistent nice looking German Loops... -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20130104/081455e6/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC