[pianotech] Acrosnic lifters alignment

[paul bruesch]

Thanks, Wim.

It's not missing, but if I were to re-bush it, what would I use, key
bushing cloth?


On Tue, Jan 8, 2013 at 6:46 PM, <tnrwim at aol.com> wrote:

> Paul
>
> Jon's suggestion is good, because it looks like all them need to be
> positioned more over the capstans. But the one you showed is more out of
> line than the others. The reason that is happening is because the bushing
> where the sticker meets the wippen is worn out, or even missing,. I suggest
> you rebush it.
>
> Wim
>
>   -----Original Message-----
> From: paul bruesch <paul at bruesch.net>
> To: Pianotech List <pianotech at ptg.org>
> Sent: Tue, Jan 8, 2013 1:24 pm
> Subject: [pianotech] Acrosnic lifters alignment
>
>  Attached are two photos of low bass in a Baldwin (Acrosonic ?) I'm
> tuning. The lifters tend to pivot left and right, slipping out from under
> the capstan, resulting in a "sticky note". All seems well at the bottom
> end. Am I missing something?
> Paul Bruesch
> Stillwater, MN
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20130108/9c3b212f/attachment.htm>