[pianotech] Replacement Hammer Suggestions Baldwin Studio Upright

[Terry Farrell]

That's where my initial thinking was pointing me. Thanks.

Terry Farrell

On Jan 22, 2013, at 5:38 PM, Roger at Integra.net wrote:

> Terry,
> I believe Ronson would be too soft. Abel is a better guess.
> Roger
> 
> -----Original Message----- From: Terry Farrell
> Sent: Tuesday, January 22, 2013 1:07 PM
> To: pianotech at ptg.org
> Subject: [pianotech] Replacement Hammer Suggestions Baldwin Studio Upright
> 
> I have  a client with a 1983 Baldwin Studio Upright (model #4021) and all the hammer felts have come unglued from their moldings. I'm looking for recommendations on a set of replacement hammers. The owner likes a mellow-sounding piano in general. I'm thinking Ronsen or maybe Abel.
> 
> Any suggestions?
> 
> Thanks.
> 
> Terry Farrell