On Mar 8, 2013, at 11:49 AM, Alan Eder <reggaepass at aol.com> wrote: ... and while we are on the subject, who out there thinks it is worth the effort to consolidate the paper punchings (so you wind up with fewer, thicker punchings rather than more thinner ones)? I have been doing this (with the aid of a dial pressure gauge) for years, but always have all of my methods under review. Alan Eder Yes, I try to have two to three paper and all the others cardboard. Al - High Point, NC -----Original Message----- From: Patrick C. Poulson <pcpoulson at sbcglobal.net> To: pianotech <pianotech at ptg.org> Sent: Fri, Mar 8, 2013 8:39 am Subject: Re: [pianotech] Key Leveling Time It takes me on average 2 hours to level keys on an upright, more on a grand due to the time taken to remove and replace the stack. Factory workers can probably do this faster. Patrick C. Poulson Registered Piano Technician 530-265-1983 -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20130308/aa2a94fa/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC