Yes I do. Three uprights are ready to be destroyed. One is a player. Jim Coleman, Jr RPT Staff Piano Technician- University of Tennessee President- Piano Technicians Guild jcolem21 at utk.edu<mailto:jcolem21 at utk.edu> jcpanoman at colemantools.com<mailto:jcpanoman at colemantools.com> 602-989-0005 Cell 865-465-7100 Home 865-748-4885 UT Office ________________________________ From: pianotech-bounces at ptg.org [pianotech-bounces at ptg.org] on behalf of Noah Frere [noahfrere at gmail.com] Sent: Monday, March 18, 2013 8:25 PM To: pianotech at ptg.org; jcpanoman at gmail.com Subject: Re: [pianotech] Scrap value of plate That might make a good Chapter fundraiser, get about 5 pianos together and bring in a couple hundred bucks, Jim - do you still have those pianos in the backyard? On Wed, Mar 13, 2013 at 2:36 PM, Greg Newell <gnewell at ameritech.net<mailto:gnewell at ameritech.net>> wrote: I always just bust up what I can, take the loose pieces and take the rest to the dump. I get maybe half that but it only takes me about an hour from start to finish (all tools put away). I love to swing that sledge hammer. Cathartic, if you know what I mean. Greg Newell Greg's Piano Forte 216-226-3791<tel:216-226-3791> (office) 216-470-8634<tel:216-470-8634> (mobile) www.gregspianoforte.com<http://www.gregspianoforte.com> gpf at ameritech.net<mailto:gpf at ameritech.net> -----Original Message----- From: pianotech-bounces at ptg.org<mailto:pianotech-bounces at ptg.org> [mailto:pianotech-bounces at ptg.org<mailto:pianotech-bounces at ptg.org>] On Behalf Of Dean May Sent: Wednesday, March 13, 2013 2:33 PM To: pianotech at ptg.org<mailto:pianotech at ptg.org> Subject: Re: [pianotech] Scrap value of plate No kidding! :-) It was a fun time with the kids though as they helped and I used the $40 to take them out for ice cream. So my net profit was even lower. Dean Dean W May (812) 235-5272<tel:%28812%29%20235-5272> voice and text PianoRebuilders.com (888) DEAN-MAY Terre Haute IN 47802 -----Original Message----- From: pianotech-bounces at ptg.org<mailto:pianotech-bounces at ptg.org> [mailto:pianotech-bounces at ptg.org<mailto:pianotech-bounces at ptg.org>] On Behalf Of Ron Nossaman Sent: Wednesday, March 13, 2013 2:27 PM To: pianotech at ptg.org<mailto:pianotech at ptg.org> Subject: Re: [pianotech] Scrap value of plate On 3/13/2013 1:13 PM, Dean May wrote: > 400 lbs would be a pretty big piano. I took in an aluminum frame out > of a console, along with a bunch of other scrap and got $40 total. > Paid me about $5/hr to get it all apart. :-p You need to learn to work faster. You could have made $7.50. Ron N ----- No virus found in this message. Checked by AVG - www.avg.com<http://www.avg.com> Version: 2013.0.2904 / Virus Database: 2641/6164 - Release Date: 03/11/13 -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20130319/6e3c478b/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC