Removing key leads

[Roger Jolly]

Hi Ed,
       A fail exchange of ideas, heck the drill press is sitting there and
I've never thought to use it for that.  Come to think of it, I'm going to
try to use the press to spead the leads as well. Thank's
Regards Roger



At 04:34 PM 6/5/99 -1300, you wrote:
>Hi Del,
>	Do like Roger said, then clamp the scrap to a drill press bed.  Chuck a
>piece of rod or reverse an old drill bit in the chuck.  Set the quill and the
>table so there's just enough clearance for the key. Put a trashcan under the
>drill press to catch the old leads.  Don't turn on the drill press, just
use it 
>for the leverage.
>	Don't breathe the dust!
>	Ed Sutton
>
Roger Jolly
Balwin Yamaha Piano Centres.
Saskatoon/Regina.
Canada.