advice on action parts

Vince Mrykalo Vince@byu.edu
Mon Mar 22 13:56 MST 1999


---------------------- multipart/alternative attachment

Ken,
Did you find the increased dip to be a problem?

At 02:40 PM 3/21/99 -0500, you wrote:
>        Reply to:   RE>advice on action parts

>However, this is less true for nine foot pianos with their longer keys
because
the longer key provides additional wood that introduces more inertia. This was
proven rather dramatically to me with a "D" here at Oberlin that was built in
1987, had post 1984 shanks (17mm action center to knuckle distance), good
upweight/downweight specs, and was always perceived as being heavy. At this
moment, I can't find my notes on that piano that would tell me what the key
ratio average was; but, suffice to say, that it was significantly below 2
to 1.
>
>By moving the capstans to get a better key ratio -- you also have to move the
wippen heel to match the new capstan position -- the piano suddenly felt
light,
so much so that I wished I had not moved the capstans so much. Nothing else
was
changed other than the capstan and wippen heel position (the latter gives the
wippen more mechanical advantage also) and now people were saying the piano
was
a little on the light side.
>
>Ken Sloane, Oberlin Conservatory
>

Vince
<mailto:vince@byu.edu>
Visit the web page for the Pacific Northwest Conference at: 
<www.pnwpianoconf.com>  
---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/42/5d/59/14/attachment.htm

---------------------- multipart/alternative attachment--



This PTG archive page provided courtesy of Moy Piano Service, LLC