> I may have to do something with the block later > but for the moment, everything is quiet. :-) Consider exchanging positions, left to the right and right to the left. Those should be symmetrical blocks but only trying it will tell for certain. It worked for me, once. More often than not I have found the tray tilted, usually up in the treble, so I have had to cut off the bottom of the block and make a wedge for the top to level the tray. So, reversing them may cause you to have to level the tray again but you will have a fresh wood hole. Easier than plugging and redrilling. Good detection work! Newton
This PTG archive page provided courtesy of Moy Piano Service, LLC