At 02:28 PM 3/17/02, you wrote: >Hi Ed, > This works extemely well and there is no sign of it being > done. The hole at the bottom of the pin acts as a cup, and gets the CA > to where it needs to be. Going from the top, a fair amount of the > material ends up between the block and the plate. > >Roger > > > >At 12:40 PM 3/17/02 -0600, you wrote: >>How about turning the piano upside down and applying CA glue to the pin >>holes? >>Ed S. >> > >Ed & Roger- > >What viscosity CA are you using? > >--------------------------------- >Lawrence Becker, RPT >Piano Technician >College-Conservatory of Music >University of Cincinnati >----------------------------------
This PTG archive page provided courtesy of Moy Piano Service, LLC