pin pounding

jolly roger baldyam@sk.sympatico.ca
Thu Mar 21 09:09 MST 2002


---------------------- multipart/alternative attachment

Hi Lawrence,
                       The the thin Red Hot stuff or equivalent. 
Roger



At 07:19 AM 3/21/02 -0500, you wrote:
>At 02:28 PM 3/17/02, you wrote:
>>Hi Ed,
>>           This works extemely well and there is no sign of it being 
>> done.  The hole at the bottom of the pin acts as a cup, and gets the CA 
>> to where it needs to be.   Going from the top, a fair amount of the 
>> material ends up between the block and the plate.
>>
>>Roger
>>
>>
>>
>>At 12:40 PM 3/17/02 -0600, you wrote:
>>>How about turning the piano upside down and applying CA glue to the pin 
>>>holes?
>>>Ed S.
>>>
>>
>>Ed & Roger-
>>
>>What viscosity CA are you using?
>>
>>---------------------------------
>>Lawrence Becker, RPT
>>Piano Technician
>>College-Conservatory of Music
>>University of Cincinnati
>>----------------------------------
> 

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/1c/d1/23/6e/attachment.htm

---------------------- multipart/alternative attachment--


This PTG archive page provided courtesy of Moy Piano Service, LLC