speaking of front rail bushings

[Jon Page]

At 11:26 AM 9/5/2002 -0400, you wrote:
> >My predecessor put new keytops on a S&S M. The problem is, he put on very
> >thick keytops, but didn't rout down the keys. As a result, in order to get
> >the sharps 1/2" above the whites, and then get 3/8" keydip on them, I have
> >to put so many punching under the sharps, that the white keys are hitting
> >those punchiness before they bottom out. This results in the white keys
> >are only getting about 5/16", or less, key dip. This is happening mostly
> >in the bass.
> >
> >Other than replacing the keytops, does anyone have a solution to the
> >problem.
> >
> >Wim


Replace the keytops and plane to the correct thickness.

Shop Motto:     Do It Right the Second Time

Jon Page