cabinet scraper honing

[Richard Moody]

Fred,
    Can you suggest a way or ways to hone a cabinet scraper.  I
finally got one at the convention and wonder how I got along
without.  (OK I abused chisels and plane irons up until now).

Richard Moody
----- Original Message -----
From: Fred Sturm <fssturm@unm.edu>
To: College and University Technicians <caut@ptg.org>
Sent: Monday, August 11, 2003 8:32 AM
Subject: Re: finger gunk poll :(


> I'll add a couple things to what others have offered:
> 1) I use a cabinet scraper, that rectangular piece of metal with
sharp 90
> degree edges (honed with a nice burr, if you are a real good
woodworker),
> both for sides of sharps and naturals (Obviously with keys out
of piano).