Shop ventilation

[Lance Lafargue]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
I will be working in an area with lots of people around/near and need
ventilation.  It is a work area in a retail strip.  It will have to be a
roof installed vent.  Thanks.
 
Lance Lafargue, RPT
LAFARGUE PIANOS
New Orleans Chapter, PTG
985.72P.IANO
lancelafargue@bellsouth.net
 
-----Original Message-----
From: caut-bounces@ptg.org [mailto:caut-bounces@ptg.org] On Behalf Of
Erwinspiano@aol.com
Sent: Sunday, December 07, 2003 2:43 PM
To: caut@ptg.org
Subject: Re: Shop ventilation
 
In a message dated 12/7/2003 9:08:10 AM Pacific Standard Time,
mbmcmillan@shaw.ca writes:
12/7/03 6:48 AM, Lance Lafargue at lancelafargue@bellsouth.net wrote:
List, 

Can anyone help me with ventilation solutions?  I have a new 12x15
workspace and I will be using lacquer to harden hammers, some light
aerosol spraying of lubricants, lacquer, etc., and need to run a simple
vent out of a commercial roof to keep the smell/toxins out of other
rooms adjacent.  I thought several of you likely had experience with
this.  Thanks! 



Lance Lafargue, RPT 

LAFARGUE PIANOS 
 
    Hey Lance
   Open the window? Low Tech Cheap. Apply the lacquer & run.
   Dale

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/41/e9/30/ff/attachment.htm

---------------------- multipart/alternative attachment--