This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hi all, I am in the process of designing a new more compact regulation tool = kit and would like some helpful ideas as what to include.=20 So far my list includes: non-directional eye screw turner ( the one that looks like a 4 leaf = clover inside) grand small spade capture tool (very thin) (female) grand large spade capture tool (female) damper screw capture tool (male) grand damper tool (very thin) back check removing tool improved Kimball rubber nut regulator (will be able to be adjusted for = depth) improved flange screw driver blade=20 capstan regulator (wood or brass holes) upright flange spacer 11/16" blade key spacer (offset) 4" extension bit with knurled shaft to use for light or fine use. All of the above will have a hex shaft that will fit a standard multi = bit screwdriver handle. Phillips and slotted blades have not been included in the list as they = are available at any hardware store as is a hammer shank drill bit. All of the above tools to have a small case =20 If you think of a tool bit thar might merit inclusion please let me = know Joe Goss imatunr@srvinet.com www.mothergoosetools.com ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/d6/5d/a5/e3/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC