Have you asked Andre about it? Alan ____________________________________________ Alan McCoy, RPT EWU Piano Technician 509-359-7017 amccoy@mail.ewu.edu > -----Original Message----- > From: caut-bounces@ptg.org [mailto:caut-bounces@ptg.org]On Behalf Of Ron > Nossaman > Sent: Tuesday, March 11, 2003 3:36 PM > To: College and University Technicians > Subject: Re: Pinblock Question > > > > >Dear List- > > Someone recently told me that to get the most even tuning > pin torque > > when using Bolduc pinblocks, one must drill the pinblock and > restring as > > quickly as possible, preferably within one day. > > Does anyone have any comments on this? > > Thanks. > > Ed sutton > > > Ed, > At one time or another I've heard the same about every block > there is, but > never got around to running systematic tests to see if, and on what > particular type of block, it may be true - and if so, to what degree. No > answer here. > > Ron N > > _______________________________________________ > caut list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC