New shop

[Ed Sutton]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
Jim-

I don't know the details; I saw it in a new shop.  It had a monster dust =
collector in a sound insulated closet. I don't know how big the floor =
duct is. The system was wonderfully quiet, except for my jealous =
thoughts.

Ed
  ----- Original Message -----=20
  From: Jim Busby=20
  To: College and University Technicians=20
  Sent: Monday, September 15, 2003 1:57 PM
  Subject: RE: New shop


  Thanks to everyone. Good books/ advice.

  =20

  Ed, I've never thought about putting the dust control through the =
floor. What about when it clogs up? Roto-Rooter? Speaking of dust =
control, if everything I have is vented properly won't the length of the =
ductwork lessen the power? The articles I've read so far just say keep =
it as short with as less pipe as possible. I'm going to the supplier and =
he should answer such questions, but your experience and advice is =
appreciated.

  =20

  Thanks

  Jim Busby

  =20

  -----Original Message-----
  From: caut-bounces@ptg.org [mailto:caut-bounces@ptg.org] On Behalf Of =
Ed Sutton
  Sent: Saturday, September 13, 2003 6:41 PM
  To: College and University Technicians
  Subject: Re: New shop

  =20

  Dust control ducts cast into the floor.  One in the middle for the =
table saw.  =20

  Vacuum and air compressor in a sound proofed clost.

  =20

    -----Original Message-----
    From: caut-bounces@ptg.org [mailto:caut-bounces@ptg.org] On Behalf =
Of Jim Busby
    Sent: Friday, September 12, 2003 1:57 PM
    To: caut@ptg.org
    Subject: New shop

    =20

    List,

    =20

    I'm currently planning my rebuilding "dream shop" at my home. Can =
anyone refer me to articles or books that might give me ideas to look =
at? It will be aprox. 1000 sq. ft. and hopefully be done this =
fall/winter. Currently I have a small, efficient shop (200 ft.) where I =
do action work and key work, etc. and the new shop will be in addition =
to this.=20

    =20

    Does anyone have the "ideal" shop (if it exists) or know of one =
worth investigating?=20

    =20

    I have definite ideas, but your input will be greatly appreciated, =
especially pertaining to layout, i.e.; floor plan.=20

    =20

    Regards,

    Jim Busby


---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/5d/f3/e0/d6/attachment.htm

---------------------- multipart/alternative attachment--