bobbling hammers, again

Erwinspiano@aol.com Erwinspiano@aol.com
Mon, 29 Sep 2003 22:41:42 EDT


---------------------- multipart/alternative attachment
In a message dated 9/29/2003 5:51:39 PM Pacific Daylight Time, 
kswafford@earthlink.net writes:

On Monday, September 29, 2003, at 06:43  PM, Wimblees@aol.com wrote:
> If I had a set of hammers from my other pianos that were hung as if by 
> chance, I would look at that. But these are Steinway hung hammers, and 
> they did a very good job. The second thing is, why would one 
> key/hammer work perfectly, and the next one, with all the same 
> characteristics, not. So you unqualified answer is valid.
>
> Wim
            WIm
   Check for a loose backcheck wire.
     Dale

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/11/ca/ad/a3/attachment.htm

---------------------- multipart/alternative attachment--

This PTG archive page provided courtesy of Moy Piano Service, LLC