Verdigris

[BobDavis88@aol.com]

---------------------- multipart/alternative attachment
In a message dated 8/10/2004 8:53:52 AM Pacific Standard Time, 
claviers@nxs.net writes:
In my opinion, there is only one sure way to get rid of the verdigris
problem if you don't what to install all new parts.  That is to remove the
old bushings, re-bush, and re-pin. 
Also temporary, for the reasons that Mary Smith gave. The same stuff that 
caused the problem in the first place will creep back into the bushing from the 
flange.
Bob Davis

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/5e/d7/a8/ff/attachment.htm

---------------------- multipart/alternative attachment--