This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment -------- Original Message -------- Subject: [admin] TR: Mensurix 5 Date: Thu, 26 Aug 2004 13:26:11 +0200 From: Isaac OLEG <oleg-i@noos.fr> Reply-To: oleg-i@noos.fr To: Caut-Bounces <caut-bounces@ptg.org> Colleagues, I forward these for the one that may be interested. had a look on that new version and many improvements as interesting functions where added to that top notch scaling software - Note the use of Imperial and different wire quality that is now easy and accurate. best regards isaac OLEG. *Objet :* Mensurix 5 *New Mensurix Version 5.0.9 available now* ** - Full integration of the MiniMens Simulator allows dynamic measures on the simulation model for contact time and volume - Strike Point Optimizer (Pro Version): This makes the software not only worth for scale designers, but also for repairers replacing hammers. - A selectable MultiGraph showing different values at the same time and updating immediately when changing a diameter in the listbox - A Reference Scale (original vs. changes or 2 different instruments can be loaded to see the differences) - Diameters table directly editable in Mensurix - Felt Stiffness and Quality can be changed - Audio output wave names are automatically set to scale/instrument filename and once simulated, can be replayed when reloading a scale - Metric and Inch Support see http://www.piano-stopper.de/html/mensurix_51.html for more information and a trial/update download -- Phil Bondi,RPT Bondi's Piano Service 239-949-3688 www.philbondi.com ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/da/ff/01/49/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC