sawing off hammershank tails

[Phil Romano]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
A razor saw made by Exacto. Available at most hobby and/or model shops.
I much prefer the Takagi Shark Saw. A mini pull saw/snap knife combo
available from Spurlock (at least it used to be). Like Eric said, it's
nice and quiet and no need for any sanding etc..
 
Phil Romano
Coastal Carolina University
Conway, SC

-----Original Message-----
From: caut-bounces@ptg.org [mailto:caut-bounces@ptg.org] On Behalf Of
Wimblees@aol.com
Sent: Thursday, February 19, 2004 2:52 PM
To: caut@ptg.org
Subject: Re: sawing off hammershank tails


In a message dated 2/19/04 1:45:02 PM Central Standard Time,
jtanner@mozart.sc.edu writes:

Hi Wim,
It might seem a bit old fashioned and technologically challenged, but 
you'd be surprised how fast an Exacto Razor Saw works.
Jeff

What's an Exacto Razor Saw?
 
Wim 


---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/61/59/38/d7/attachment.htm

---------------------- multipart/alternative attachment--