[CAUT] Rep Lever Upstop 'cushion'

[John Ross]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
Possibly Jon, means to do it tomorrow. (From one that sometimes gives the other person the benefit of the doubt)    :-)

John M. Ross
Windsor, Nova Scotia, Canada
jrpiano@win.eastlink.ca
  ----- Original Message ----- 
  From: Wimblees@aol.com 
  To: caut@ptg.org 
  Sent: Monday, October 25, 2004 5:47 PM
  Subject: Re: [CAUT] Rep Lever Upstop 'cushion'


  In a message dated 10/25/04 3:15:39 PM Central Daylight Time, jonpage@comcast.net writes:
    One third into the project the buckskin wasn't glued well at the back edge so the undercutting lifted it. I have found it more expedient to peal it back and reglue at the rear edge. What a fun job for a Tuesday afternoon. Jon Page
  Either this e-mail is a week late, or you are way off into another galaxy. It's only Monday here in Alabama. :)

  Wim 

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/1f/b3/7c/3c/attachment.htm

---------------------- multipart/alternative attachment--