---------------------- multipart/alternative attachment Mark, Thanks for reminding me. I forgot to mention to Jeff (he probably already knows) but those numbers I sent are for metric strings. I have both of the measurements on the sheet they sent me if you should need it. Avery At 02:40 PM 8/2/2005, you wrote: >Metric wire sizes aren't exactly the same as imperial... (somewhere >I have a comparison chart Ted Sambell gave me), so I'd measure them anyhow. > >Using the scale Avery sent as a guide, drop string-tension a 1/2 >turn or so at the beginning of every section. (often you can "see" >the guage changes by looking closely unison by unison) > >With your string hook in one hand and micrometer in the other, lift >each (slack) string and make your reading. > >It is very quick... and then you'll know. > >best regards, >Mark Cramer, >Brandon University > > > > > > > > > -----Original Message----- >From: caut-bounces@ptg.org [mailto:caut-bounces@ptg.org]On Behalf Of >Jeff Olson >Sent: Tuesday, August 02, 2005 1:40 PM >To: College and University Technicians >Subject: Re: [CAUT] G3 Yamaha Stringing Scale > >Thanks, guys -- I appreciate the input! > >What I'll do if the gauges aren't marked on the bridge is take a few >confirming measurements (per Willem's suggestion) and then, if it >matches the scale sent by Avery (much thanks, Avery!), I'll proceed >full speed ahead. The Yamaha is 1971, so I'm optimistic it will match. > >Best, > >JeffO >----- Original Message ----- >From: <mailto:hesand01@louisville.edu>Hans E Sander >To: <mailto:caut@ptg.org>caut@ptg.org >Sent: Tuesday, August 02, 2005 9:34 AM >Subject: Re: [CAUT] G3 Yamaha Stringing Scale > >But it wasn't a G3! > > >>> <mailto:wimblees@aol.com>wimblees@aol.com 08/02/05 11:34 AM >>> >Jeff > >If the scale isn't listed on the bridge, it might be worth your time >to measure the scale anyway, instead of relying on what Avery gave >you, or what Yamaha gives you. A number of years ago I had to order >a set of bass strings for a brand new Yamaha, and twice they sent me >the wrong set. Come to find out that Yamaha changed the scale on >that model, even though the model number was the same. > >Wim >Willem Blees, RPT >Piano Tuner/Technician >School of Music >University of Alabama >Tuscaloosa, AL USA > > >-----Original Message----- >From: Richard Murphy <rmurphy@siue.edu> >To: College and University Technicians <caut@ptg.org> >Sent: Tue, 02 Aug 2005 09:43:38 -0500 >Subject: Re: [CAUT] G3 Yamaha Stringing Scale > > >Hi Jeff, > Look on the rear notch of the bridge. >Richard > > >On 8/1/05 8:10 PM, "Jeff Olson" ><<mailto:jlolson%40cal.net>jlolson@cal.net> wrote: > > > I'm wondering if anyone knows a good source of stringing scales (aside from > > the Book)? I'm restringing a Yamaha G3 (circa late seventies), and would > > rather not laboriously measure the strings. The last time I restrung a > > Yamaha -- some time ago -- I could've sworn I remember numbers being > > stamped on the plate, but didn't find any this time. > > > > Thanks in advance, > > > > Jeff O. > > > > > > _______________________________________________ > > caut list info: > <https://www.moypiano.com/resources/#archives>https://www.moypiano.com/resources/#archives > > >_______________________________________________ >caut list info: ><https://www.moypiano.com/resources/#archives>https://www.moypiano.com/resources/#archives _______________________ Avery Todd, RPT Moores School of Music University of Houston Houston, TX 77204-4017 ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/8c/42/08/20/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC