[CAUT] Balance rail on D

[Joe And Penny Goss]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
Hi gain,
thin CA The balance rail holes with the pins in the hole.
Steam the pully keys first, they might supprise you by tightening up a =
whole bunch.
Joe Goss RPT
Mother Goose Tools
imatunr@srvinet.com
www.mothergoosetools.com
  ----- Original Message -----=20
  From: Wimblees@aol.com=20
  To: caut@ptg.org=20
  Sent: Tuesday, November 08, 2005 3:11 PM
  Subject: [CAUT] Balance rail on D


  The action on a 50 year D is getting to the point where I've =
recommended that we get a new one, but the budget just isn't there. The =
main problem is the balance rail pins. They are very loose in the rail =
and the keys are very pulley. I can glue size the balance rail holes on =
the keys, but do any of you have experience either replacing the just =
the rail, or should I glue size the holes?

  Wim 
---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/fd/20/a6/38/attachment.htm

---------------------- multipart/alternative attachment--