This is a multi-part message in MIME format.
---------------------- multipart/alternative attachment
=BD" wide by 7" circumference, are the measurements of what I have on =
hand. Pretty specialized item made, I believe, just for these =
mini-sanders, probably through arrangement by the inventor. Unless =
somebody on their own put in for some custom made stuff from somewhere =
since the sanders stopped being available, it would be highly unlikely =
to find anything even at a well stocked sanding belt supplier.=20
Greg
----- Original Message -----=20
From: John Ross=20
To: College and University Technicians=20
Sent: Friday, November 11, 2005 12:36 PM
Subject: Re: [CAUT] Foredom belt sander belts...
There are companies that just sell belts, and sandpaper.
Unfortunately, I lost the web site, but they have all sizes listed.
What is the specific size of belt we are talking of here?
John M. Ross
Windsor, Nova Scotia, Canada
jrpiano@win.eastlink.ca
----- Original Message -----=20
From: Greg Granoff=20
To: College and University Technicians=20
Sent: Friday, November 11, 2005 4:06 PM
Subject: Re: [CAUT] Foredom belt sander belts...
I would also be VERY interested. I use mine frequently, and my belt =
supply is dwindling tragically away...
Greg Granoff
Humboldt State University
----- Original Message -----=20
From: Hans E Sander=20
To: kpiano@goldrush.com ; College and University Technicians=20
Sent: Friday, November 11, 2005 11:01 AM
Subject: Re: [CAUT] Foredom belt sander belts...
I will take some. Have sander, no belts.
Hans Sander
>>> kpiano@goldrush.com 11/11/05 1:41 PM >>>
Dale Erwin gave a hammer shaping technical at our May chapter =
meeting and he
has one of those. Works quite well. He would be interested.
kpiano
----- Original Message -----
From: "Alan Crane" <alan.crane@wichita.edu>
To: "College and University Technicians" <caut@ptg.org>
Sent: Friday, November 11, 2005 9:01 AM
Subject: [CAUT] Foredom belt sander belts...
> Does anyone still use the Foredom/McCall belt sander for filing =
hammers?
> Do you have a source for replacement belts?
> If not, would you be interested in buying belts if a source =
became
available?
>
>
>
> Regards,
>
> Alan B. Crane, RPT
> School of Music
> Wichita State University
> alan.crane@wichita.edu
>
> _______________________________________________
> caut list info: https://www.moypiano.com/resources/#archives
>
>
_______________________________________________
caut list info: https://www.moypiano.com/resources/#archives
---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/cd/89/e8/84/attachment.htm
---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC