Stephen, if the patent has expired and you have a sample, could you describe what is so new about these pins. Marcel Carey, RPT Sherbrooke, QC > -----Original Message----- > From: caut-bounces@ptg.org [mailto:caut-bounces@ptg.org]On Behalf Of > Stephen Birkett > Sent: September 5, 2005 1:48 AM > To: College and University Technicians > Subject: Re: [CAUT] a new tuning pin > > > >Anyone know if what, if anything, ever became of his idea? > > US patent 4,920,847 was granted to Harold in 1990. These pins were > never put into production, and with the demise of Baldwin > the patent > eventually lapsed. > > I have some samples that Harold sent me and have tested > them, as well > as the general principles using hardware we put together in > the lab. > The idea is excellent, although sensitive to having exactly > the right > parameters and lubricant type (see Harold's patent testing) > for long > term torque stability, albeit with hundreds of repeated back and > forth cycles (which a pin would not be subjected to in a piano > application). > > I may use this type of pin in the new piano we're designing at UW. > > Stephen > -- > Dr Stephen Birkett > Piano Design Lab > Department of Systems Design Engineering > University of Waterloo, Waterloo ON Canada N2L 3G1 > tel: 519-888-4567 Ext. 3792 > Lab room E3-3160 Ext. 7115 > mailto: sbirkett[at]real.uwaterloo.ca > http://real.uwaterloo.ca/~sbirkett > _______________________________________________ > caut list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC