---------------------- multipart/alternative attachment In a message dated 9/22/2005 7:15:40 AM Central Standard Time, kswafford@earthlink.net writes: Recently restrung. Unless this also included a new pin block, where the plate was put back in wrong, it looks like the plate/bridge position came out of the factory this way. Perhaps one of the many pianos that were done wrong to be begin with during this time period. Other than repositioning the bridge pins, and/or moving the plate, there is not much that can be done. Is CA glue strong enough to withstand that much side bearing? Wim ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/79/b9/cc/5e/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC