Dear List- My partner here at ASU Rick Florence came up with a novel idea for pulling bridge pins. Clamp on the pin solidly with a set of vise grips that have a good ridge near the jaws that you can get the claw part of a claw hammer underneath. Set an appropriately tall piece of wood on the sound board itself and lever them out. This worked very quickly and took out even the toughest pins with no damage to the hole. David -- David C. Brown Office - 1-480-965-6760 Piano Technician david.c.brown.2 at asu.edu School of Music Cell- 1-480-751-7715 Arizona State University -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20061214/ec5d8e0d/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC