> By the way, the piano moved up to Idaho from California last summer, but > the breakage had already started in California, so it's not an > environment issue. Also, most of the breakage has occured at the > agraffe. but the last one broke at the bridge pin. All have been bichords. > > Any ideas for me? > > Thanks, > > Otto Did the same side of the bichord break each time? The angle of the hammer will cause the hammer to tip to one side, more so on ff blows. One string would take the force of the blow. The hammers themselves should be needled to improve the spring and shaped so they don't spike the wave. String wave patterns that produce high volume levels in the higher partials will cause the spike to be near the bridge pin or aggrafe. Still, that must be one powerful, screwy wave pattern to bust the wire at the bridge pin!!!!! Harumphphhph Keith
This PTG archive page provided courtesy of Moy Piano Service, LLC