This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment I'll probably never be completely happy with my kit but I do like the w= ww.duluthtrading.com kit I have now. Light but still has a strap...no= t perfect but pretty good David Ilvedson, RPT Pacifica, California Original message From: "Ronald E Engle" To: caut@ptg.org Received: 1/8/2006 4:12:51 PM Subject: Re: [CAUT] The Ideal Tool Case? My odyssey for the perfect case continues also. I liked the Genck case= which I used for 10 or so years. After that wore out I bought one of = the "close out" Genck's. I could not use it because it was clumsy and = you have to fill it to make it work and it became to heavy for me. I agree with Wim's philosophy and I would add an element of my own. Si= mplify, Simplify, Simplify. Why carry around tools you seldom use? Ho= wever I have not reached the tuning hammer and mutes only, approach yet= . Presently I am using a laptop computer carrying case I had laying aro= und which happens to be identical to ones for sale at Office Max or any= office supply store. The pouches, slots, flapped side pocket, movable= divider all just happen to work out perfectly for me. The Modificatio= n I did make is to borrow a pallet from the new Genck which has velcro = hooks on the bottom edge. It lays right in the case where the computer= use to and is permanently positioned so the top edge of the pallet lay= s on the top edge of the case, so it is slanted for easy removal of too= ls, it is hinged at the bottom because of the velco and items can be ke= pt underneath. The movable divider is beside the pallet giving space fo= r a few small tools that are placed in there loose. At the space at th= e bottom of the pallet I place my tuning hammer and a few necessities t= hat are used at every tuning. This kit is light, everything is easily = accessible, the large flapped side space (usually empty) is used for te= mporary tools or supplies I know I might need for the job, sometimes um= brella, hat, ETD if you use one. It is soft so I don't worry about layi= ng it on furniture and worse yet banging it against furniture ( I am cl= umsy). It has a removable shoulder strap which can be doubled to hold = the case lid in upright position. Everyone has to work out what's best for them. I am very happy with th= is arrangement. Ron Engle On Sun, 8 Jan 2006 14:40:39 EST Wimblees@aol.com writes: Jeff I use a tool roll, as sold by the piano supply stores, to hold my basic= tuning and regulating tools, pliers, etc. I have another small bag for= my voicing tools. These is carry in one of the briefcases sold at the = home office, which has the PTG logo on it. The briefcase is leather, an= d can be carried by a shoulder strap. It has room for lots of extra goo= dies, including paper work, glue, etc. I like the shoulder strap, as it= takes the weight off my arms and hands. As was mentioned, there is no such a thing as a perfect case. What you = want is something that will hold the basic things you need most of the = time that will get you thought a basic tuning, voicing, and regulation.= The rest you should keep in a variety of carrying cases and tool boxe= s in your car. Wim ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/d4/50/60/b9/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC